Imagine you are entertaining in your formal dining room whilst background music plays softly from the near invisible speakers in the ceiling. You can change CD tracks, radio stations or even adjust the volume without leaving your chair or your guests. BUT you don't have one of those fancy, not to mention expensive, remotes that works through walls!! You don't need to! Imagine being able to do this in any room you choose...

Infrared Repeater Systems SEE BELOW

In Wall Volume Controls

In Wall / Ceiling speakers and Volume Controls

See Wiring Example

See Instructions

CAMBRIDGE INCOGNITO "A BUS" MULTI ROOM

MAP1200 Complete 6 Zone Multiroom Audio Pack

Just add speakers.

6 AUDIO SOURCES --> 6 LISTENING ZONES $1399.00

Imagine the flexibility of listening to a radio station in the kitchen, DVD's in the living room, and your favourite CD's on the patio. Now, you can enjoy any audio source when and where you want it.

Package includes:

MAP1200 amplifier
1x RJ45 hub
- Interchangeable hub wall plate in Black, White or Beige
6x keypads
- 6x black keypad face covers
- 6x white keypad face covers
- 6x beige keypad face covers
- 6x black keypad wall plate
- 6x white keypad wall plate
- 6x beige keypad wall plate
1x VGA plug to Dual VGA plug connector
1x remote control with 2x AAA batteries included

The MAP1200 home audio system with its advanced Generation D technology provides a functional, easy-to-install, highly compatible, expandable, and user-friendly audio distribution system.

All that's needed are speakers, wire, and your audio source equipment. Once you complete the easy setup process, you can have 6 independent audio zones with each zone having its own keypad that can be controlled with the included IR remote control.

See Manual

PA 5024 6 Zone Multizone Amplifier

Perfect for driving multiple speakers in your house or office

Includes 12 independent amplifier modules rated at 40W, which can be configured as mono or used to 6 stereo amplifiers. Accepts RCA inputs and provides speaker outputs via binding post connectors. volume controls are provided on the front panel for each zone. Each channel may be bridged for higher power requirements.

Infrared Repeater Systems

Pro 2 IR Budget Repeater kit $90.00

Click to read instructions

Put your equipment in a cupboard and operate with any remote

Kit includes of:

Infrared connecting block
Connects IR receivers, power supply and emitters together to interface the IR system to the audio/ video components.
- Six emitter output connections
- Convenient IR confirmation LED
- Status power receptacle with LED indicator
- 3 conductor 1/8" receptacle for interfacingwith many brands of free standing IR receivers
- Compact size for mounting near audio equipment
- 82 (W) x 60 (H) x 27 (D) mm
- 110 g
Mini stick infrared receiver
Receives IR signals from a handheld IR remote control and relays this signal to the audio/video equipment for operation from another room. The receiver has a non-skid base and is placed on a flat surface.
- CFL friendly - allows installation in areas with compact fluorescent lighting.
- Blue IR confirmation LED
- Wide band IR
- 3 m cable with 3.5 mm stereo mini plug
Infrared emitter
- Round shape, with elegant & compact size
- Transparent housing
- 10ft cable length
- 3.5mm standard mono plug
- With self-adhesive tape for quick and easy fixing on any hard, clean and dry surface
12 V 200 mA power supply

The Kordz infrared repeater system allows you to enjoy and control your favourite music from anywhere in your home. This is achieved with the simple and flexible installation of repeaters (as seen below) in any room you choose - this effectively takes the remote control sensors from your AV equipment and duplicates them in every room. This means your remote control will work from anywhere there is a repeater installed!

The system has been designed with the installer in mind. Every part connects very simply. Once set up, a small LED on each of the receiver, block and flashers confirms operation.

KORDZ IR-KIT4 $122.00 IR System Esentials Kit Contains 1x connecting block, 4x IR-EM1 single emitters & 1x PS-125 power supply Simply add your choice and required quantity of IR targets to make up a full IR system
INDIVIDUAL COMPONENTS Plasma/LCD Friendly SPECIAL DISCOUNT 10% for a package
IR-30T Brass Tube Repeater $110.00 Brass Tube Digital IR Target 12V DC system operation for use with KORDZ® IR repeater system - compatible with other common 12V systems such as Xantech® Narrow bandwidth 36-40kHz with proprietary DSP IC for greatly reduced noise interference - CFL friendly 1/2" mounting hole required - removable front cap; 2 supplied - natural brass (as shown), and white colour Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block (see below)
IR-70C IR Wall Plate Receiver $95.00 Wall Plate Digital IR Target 12V DC system operation for use with KORDZ® IR repeater system - compatible with other common 12V systems such as Xantech® Narrow bandwidth 36-40kHz with proprietary DSP IC for greatly reduced noise interference - CFL friendly Power STATUS compatibility Clipsal® 2000 styled wall plate design (non-genuine) Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block (see below)
IR-VC70 IR Wall Plate & Volume Control Receiver $149.00 Wall Plate Digital IR Target with integrated volume control 12V DC system operation for use with KORDZ® IR repeater system - compatible with other common 12V systems such as Xantech® Narrow bandwidth 36-40kHz with proprietary DSP IC for greatly reduced noise interference - CFL friendly Power STATUS compatibility 70W RMS/channel, 12 step volume control with impedance matching capability Clipsal® 2000 styled wall plate design (Model: IR-VC70C), or US Decora® style (Model: IR-VC70D) Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block (see below)
IR-50P Stick on IR Receiver $160.00 (NOTE: MAX CABLE LENGTH 20M) BLACK OR SILVER Stick-on Digital IR Target 12V DC system operation for use with KORDZ® IR repeater system - compatible with other common 12V systems such as Xantech® Narrow bandwidth 36-40kHz with proprietary DSP IC for greatly reduced noise interference - CFL friendly Simple stick-on design mounts virtually anywhere. A double sided adhesive pad is included for versatile mounting Supplied pre-assembled in a grey housing, but white & black housing are also included for the ultimate in versatility Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block (see below)
IR-C4 IR Connecting Block $89.00 IR System Connecting Block 12V DC system operation for use with IR targets with in-built repeaters (eg: KORDZ®, Xantech®, etc) Amplified input stage supports long cable runs Four standard 3.5mm emitter ports - voltage regulated for consistent operation STATUS compatibility (with supporting IR targets) Use with KC-J8 structured wiring junction box for the connection of multiple repeaters to a single IR-C4 connecting block (see below)
IR-EM I Emitter $15.95 Single IR Emitter Industry standard 3.5mm mono plug Tiny & elegant emitter head is IR transparent for direct remote control operation Includes spare adhesive pad for installation versatility BEST performing as the IR-C4 output current is not split (as it is with dual emitters)
PS-125 Regulated Power Supply $25.00 12V DC 500mAh power supply Suits KORDZ® IR-C4 Voltage regulated to ensure consistent 12V supply for up to 8 IR targets Transformer based for best reliability
KC-J8 Structured Wiring Junction Box $55.00 Structured wiring junction box Passive box for simple and tidy cable management where multiple IR targets need to be connected to a single IR Connecting Block, such as the IR-C4 Removable terminal strips for installer friendly installations Includes mounting hardware Also compatible for use with a structured audio/volume control system - ie: connect multiple volume controls/speaker pairs back to one amplifier with reliable and tidy cable management
IR-4DATA $77.22 / 100m Roll $2.50 /m Low Capacitance DATA Cable ~ High performance IR data cable for the enhancement of any 3 or 4 core IR system ~ 4x 24AWG solid USA/Japanese blend OFC cores ~ Nitrogen injected polyethylene insulation for industry leading low capacitance - reduces data loss/attenuation ~ Much easier to work with than standard CAT5E/6 cables ~ Metre marked, 100m spool
KORDZ INSTALL series speaker cable 18AWG. 2 CORE OR 4 CORE CL2 Fire Rated Jacket. For the best in convenience for the custom installer, both models are available on 100m metre marked wooden spools, or in 100m pull boxes. The outer jacket is thin yet very strong, making it easy to pull reliably through walls. It's easy to strip, with the choice of materials making it a winner for awesome and consistent performance for many years. 2 CORE OR 4 CORE. distributed audio speaker cable. Each core has 28 strands of .2mm copper 18SWG / .8mm sq. Material High purity OFC 99.998% Conductor size 4x 18AWG stranded 40/0.2mm Outside Diamter approx 7mm	2 CORE $3.50 /m 4 CORE $5.50 /m Ring for 100m roll pricing $255/ 100M

Home